Seachem

HeadStart™ conditioners pack combines Prime™, Stability™, and Clarity™ into one convenient pack. It’s great for any aquarist but is ideal for the beginner.

Sizes: 3 x 100 mL

Prime® is the complete and concentrated conditioner for both fresh and salt water. Prime® removes chlorine, chloramine and ammonia. Prime® converts ammonia into a safe, non-toxic form that is readily removed by the tank’s biofilter. Prime® may be used during tank cycling to alleviate ammonia/nitrite toxicity. Prime® detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them. It will also detoxify any heavy metals found in the tap water at typical concentration levels. Prime® also promotes the production and regeneration of the natural slime coat. Prime® is non-acidic and will not impact pH. Prime® will not overactivate skimmers. Use at start-up and whenever adding or replacing water.

Sizes: 50 mL, 100 mL, 250 mL, 500 mL, 2 L, 4 L, 20 L

Stability will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome". Stability® is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite and nitrate. Unlike competing products, the bacteria employed by Stability® are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability® is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of over use. Stability® is the culmination of nearly a decade of research and development and represents the current state of the art in natural biological management.

Sizes: 50 mL, 100 mL, 250 mL, 500 mL, 2 L, 4 L, 20 L

Clarity is the ultimate clarifier for both fresh and saltwater. It employs an advanced polymeric flocculating agent that is both reef and plant safe. Clarity™ is the only clarifier on the market that does it all! Clarity™ will clear all types of clouding including, but not limited to, chemical clouding and particulate clouding (i.e. stirred up gravel bed). Freshwater and Marine. Plant and reef safe.

Sizes: 100 mL, 250 mL, 500 mL, 2 L, 4 L, 20 L

American Cichlid Salt™ is a chemically sound blend of salts designed to replicate the natural environment of American cichlids. It contains all physiologically essential elements such as magnesium, calcium, sodium, potassium, and includes trace components such as iron, aluminum, and iodide. It does not contain harmful or unnecessary ingredients such as nitrates, phosphates, arsenic, lithium, or cadmium. Use Seachem's Cichlid Trace to restore and maintain important trace elements between water changes.

Sizes: 50 g, 250 g, 20 kg

American Cichlid Salt is formulated so that dosages vary depending on the species’ origin and need only be added when setting up an aquarium or with water changes.

Directions: All doses given for 110 L (30 gallons*). SOUTH AMERICAN: Use 2.5 g (1/2 teaspoon). CENTRAL AMERICAN: Use 1.25 g (1/4 teaspoon). BUFFERING: Acid Regulator™ (pH 4.5–5.8) and Neutral Regulator™ (pH 7.0) should be used to adjust pH. TIPS: Use when setting up an aquarium and when making water changes. To add salt to an established tank, base dose on water being changed. Do not use salt when simply replacing evaporated water. It is best to dissolve the salt in freshwater before use.

Neutral Regulator™ adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia. The use of Neutral Regulator™ makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator™ with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment.


Sizes: 50 g, 250 g, 500 g, 1 kg, 4 kg, 20 kg, 100 kg

In addition to Neutral Regulator’s™ superior buffering capacity, it will remove chlorine and chloramine, bind ammonia, nitrite, and nitrate, stimulate slime coat production, and buffer the pH to 7.0.

Directions

Use 1 level teaspoon for every 40–80 L (10–20 gallons*) once or twice a month (or as necessary to maintain a pH of 7.0.) Neutral Regulator™ may be added directly to the aquarium at any time. Ideally, it should be used when adding or changing water by dissolving in the replacement water.

Discus Buffer™ helps to replicate the ideal Discus environment (low pH & low GH (General Hardness)). Discus Buffer™ will lower pH and keep it lowered. Discus Buffer™ also softens water by precipitating calcium and magnesium. Use Discus Trace™ to restore the proper level of trace elements required by thriving, healthy Discus.

Neutral Regulator and Discus Buffer™ can be used in combination to achieve a desired pH when performing water changes or adding top off water. The ratio chart below is designed for r/o water where there is generally no buffering capacity.

Sizes: 50 g, 250 g, 500 g, 1 kg, 4 kg, 20 kg, 100 kg

Directions: Use 1 level teaspoon (7 g) for every 40-80 L (10-20 gallons*) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH. To raise pH, use Neutral Regulator. To target a particular pH use in combination with Neutral Regulator following the chart below. This chart assumes the use of unbuffered water (RO or DI). If water is already buffered use the chart as a starting guide. Use Prime to dechlorinate tap water before doing a water change.
Use these ratios to target pH
Neutral Regulator

Discus Buffer
pH
1
:
1
6.8
1
:
2
6.4
1
:
3
6.2
1
:
4
6.1
1
:
6
6.0
1
:
9
5.8
To target a particular pH use in combination with Neutral Regulator









Acid Regulator™ adjusts pH to the acidic range (4.5 – 5.5) and softens water by precipitating calcium and magnesium. Acid Regulator™ supports the establishment of the optimal environment for all acid acclimated species (e.g. neons and other tetras, etc.). For further freshwater environment enhancement, use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

Sizes: 50 g, 250 g, 500 g, 1 kg, 4 kg, 20 kg, 100 kg

Directions: Use 1 level teaspoon (7 g) for every 40 L (10 gallons*) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH. To raise pH, use Neutral Regulator. To target a particular pH use in combination with Neutral Regulator™ following the chart below. This chart assumes the use of unbuffered water (RO or DI). If water is already buffered use the chart as a starting guide. 
Use these ratios to target pH
Neutral Regulator

Acid Regulator
pH
1
:
1
6.8
1
:
2
6.4
1
:
3
6.2
1
:
4
6.1
1
:
6
6.0
1
:
9
5.8
To target a particular pH use in combination with Neutral Regulator following the chart









Cichlid Lake Salt™ is a chemically sound blend of salts designed to replicate the natural environment of Cichlids. It contains all physiologically essential elements such as magnesium, calcium, sodium, potassium, and includes trace components such as iron, aluminum, and iodide. It does not contain harmful or unnecessary ingredients such as nitrates, phosphates, arsenic, lithium, or cadmium. Use Seachem’s Cichlid Trace to restore and maintain important trace elements between water changes.

Sizes: 350 g, 700 g, 1.4 kg, 4 kg, 20 kg, 100 kg

Although the major Rift Lakes contain basically the same mineral salts, they do so in greatly differing concentrations. Cichlid Lake Salt™ is formulated so that dosages vary depending on the lake of origin and need only be added when setting up an aquarium or with water changes. Many competing products are little more than combinations of Epsom salt and bicarbonate of soda. This will not provide a complete replication of the mineral salts that are contained in the lakes of Africa, in particular calcium and potassium.

Directions

All doses given for 40 L (10 gallons*). TANGANYIKA: Use 11 g (1.5 teaspoons). MALAWI: Use 5.5 g (3/4 teaspoons). VICTORIA: Use 3.6 g (1/2 teaspoon). pH BUFFERING: Seachem's Tanganyikan Buffer (pH 9.0–9.4) and Malawi Victorian Buffer (pH 7.8–8.4) should be used to adjust carbonate hardness and pH. TIPS: Use when setting up an aquarium and when making water changes. To add salt to an established tank, base dose on water being changed. Do not use salt when simply replacing evaporated water. It is best to dissolve the salt in freshwater before use.

Malawi/Victoria Buffer™ is a blend of carbonate salts designed to enhance the natural environment of cichlids by increasing hardness, buffer capacity, and pH. It is formulated to maintain a pH of 7.8–8.4. For optimum replication of the Malawi/Victoria environment, use with Cichlid Lake Salt and Cichlid Trace

Directions: Use 5 g (1 level teaspoon) for each 40–80 L (10 to 20 gallons*) of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks. TIPS: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachem’s Cichlid Lake Salt and between water changes as needed to maintain pH. Seachem’s Malawi/Victoria Buffer™ is formulated to maintain a pH between 7.8 and 8.4, depending on the amount used. To attain a lower pH than 7.8, you may use Seachem's Acid Buffer in combination with Malawi/Victoria Buffer™. To attain a higher pH than 8.4, use Tanganyika Buffer

Tanganyika Buffer™ is a blend of carbonate salts designed to enhance the natural environment of Cichlids by increasing hardness, buffer capacity, and pH. It is formulated to maintain a pH of 9.0–9.4. For optimum replication of the Tanganyikan environment, use with Cichlid Lake Salt and Cichlid Trace

Sizes: 250 g, 500 g, 1 kg, 4 kg, 20 kg, 100 kg

Directions: Use 5 g (1 level teaspoon) for each 40–80 L (10 to 20 gallons) of water each day until desired pH is attained and maintained. Thereafter, use as required to maintain pH, usually no more than once every two to three weeks. HINTS: It is best to dissolve the buffer in freshwater before use. Use when setting up an aquarium or making water changes (preferably after the addition of Seachem’s Cichlid Lake Salt and between water changes as needed to maintain pH. Seachem’s Tanganyika Buffer™ is formulated to maintain a pH between 9.0 and 9.4, depending on the amount used. For lower pH, use Malawi/Victoria Buffer (pH 7.8–8.4), either alone or in combination with Tanganyika Buffer™.

Alkaline Regulator™ adjusts pH to the alkaline range (7.1 – 7.6) and supports the establishment of the optimal environment for all alkaline acclimated species (e.g. bosemani, various rainbows etc.). For further freshwater environment enhancement, use Fresh Trace™ to restore the proper level of trace elements required by thriving, healthy freshwater community fish.

Sizes: 50 g, 250 g, 500 g, 1 kg, 4 kg, 20 kg, 100 kg
Directions: Use 1 level teaspoon (7 g) for every 40 L (10 gallons*) daily until intended pH is reached. Thereafter, use once a month or with water changes as required to maintain pH. To lower pH, use Neutral Regulator To target a particular pH use in combination with Neutral Regulator™ following the chart below. This chart assumes the use of unbuffered water (RO or DI). If water is already buffered use the chart as a starting guide. 
Use these ratios to target pH
Neutral Regulator

Alkaline Regulator
pH
1
:
1
7.1
1
:
1
7.2
1
:
1
7.3
1
:
2
7.4
1
:
5
7.5
To target a particular pH use in combination with Neutral Regulator following the chart









Fresh Trace™ supplies a broad range of trace elements demonstrated to be necessary for proper fish health and growth. Unlike terrestrial animals, fish obtain nutrients from both their food and environment. Trace elements are normally depleted by utilization, oxidation and precipitation, thus it is important to restore them on a regular basis. Fresh Trace™ contains only those elements actually demonstrated to be required by fish.

Sizes: 100 mL, 250 mL, 500 mL, 2 L, 4 L, 20 L

Directions: Use 1 capful (5 mL) for every 80 L (20 gallons*) once or twice a week.

AmGuard™ safely, rapidly and efficiently removes toxic free ammonia. It is safe to use during tank cycling and is ideal for treating unexpected emergency situations. AmGuard™ reacts with free ammonia within minutes and does not alter pH. Ammonia can exist in two forms: free and ionized. It is only the free form that is toxic. Traditional ammonia test kits convert all ammonia to free ammonia by raising pH to 12–14; at this pH no ammonia removing product can function, and thus a false positive reading will result.

AmGuard™ is the strongest liquid ammonia binder on the market. It works within minutes to detoxify free ammonia, and it doesn’t degrade for nearly forty-eight hours. That’s nearly twice as long as our competitors’ products.

Flourish™ is a comprehensive plant supplement for the natural freshwater aquarium. It contains a rich assortment of important micro elements, trace elements and other nutrients. These include calcium, magnesium, iron and other important elements that have been shown to be beneficial to aquatic plants.

Flourish Excel™ is a source of bioavailable organic carbon. All plants require a source of carbon. This is typically obtained from CO2, but, may also be derived from simple organic compounds (such as photosynthetic intermediates). The use of either CO2 injection or Flourish Excel™ does not necessarily negate the use of the other. Because the processes of producing photosynthetic intermediates and building onto them occur simultaneously, one can derive a substantial benefit with the use of Flourish Excel™ either alone or in conjunction with CO2 .

Flourish Tabs™ are growth stimulating tablets for plant roots. They contain essential trace elements, amino acids, and vitamins. They are rich in iron, manganese, magnesium, calcium, potassium, inositol, choline B12, biotin, and other factors that have been determined to be beneficial to aquatic plant roots. They contain no phosphate or nitrate that would promote algae proliferation. Each pack of ten tablets treats a 12 X 30 inch plant bed twice.

Flourish Iron™ is a highly concentrated (10,000 mg/L) ferrous iron (Fe+2) gluconate supplement. It should be used in those cases where the iron requirements exceed that which can be delivered by Flourish at the recommended dose or signs of iron deficiency appear (such as short and slender stems or yellowing between veins.) Contains no phosphate or nitrate.

Flourish Nitrogen™ is a concentrated (15,000 mg/L) blend of nitrogen sources. It provides nitrogen in both the nitrate form and the plant-preferred ammonium form. However, no free ammonia is released because the ammonium in Flourish Nitrogen™ is complexed and unavailable until utilized by the plants. Flourish Nitrogen™ also provides nitrate for those plants that can readily utilize nitrate as well.

Flourish Potassium™contains 50,000 mg/L of potassium suitable for the natural planted aquarium. Potassium is one of several elements that are vitally important to maintaining a vigorous level of growth in a planted aquarium. Potassium can become depleted in a rapidly growing system or when the source water has a low mineral content. In these cases potassium could become the limiting factor to growth. Use Flourish Potassium™ to prevent potassium depletion (signs of which include yellowing in older leaves) and maintain the highest level of growth.

Flourish Phosphorus™ is a safe solution (4500 mg/L phosphate) of potassium phosphate that takes the guess work out of phosphate dosing. Unlike competing products that mix nitrate and phosphate in a fixed ratio, Flourish Phosphorus™ (being nitrate free) allows you to dose phosphorus according to the needs of your plants without the risk of overdosing nitrates. When used as directed Flourish Phosphorus™ will enhance and accelerate the growth of aquatic plants without enhancing algae growth.

Ammonia Alert™ is an innovative color device for continuously detecting and monitoring toxic free ammonia. A sensor changes reversibly from yellow to green to blue, relative to the ammonia concentration. No test kits, chemicals, or procedures are needed. The device detects less than 0.05 mg/L (ppm) free ammonia and alerts you to the #1 killer before any sign of stress. It lasts over a year. Marine or freshwater use.

Alert Combo No strips, no tests, just constant readings. Now Ammonia Alert and pH Alert come together! Ammonia Alert and pH Alert employ Seachem Sensor Technology; a sensor changes color reversibly to alert you to shifts in ammonia levels and shifts in pH respectively. Simply place them visibly anywhere in the aquarium or filter and read anytime. It's that easy! No chemicals or test procedures are required. pH Alert lasts 3-6 months, and is suitable for freshwater use only. Ammonia Alert lasts 1 year, and is suitable for freshwater and saltwater applications.




Make a Free Website with Yola.